The bar just want to stop a couple rotations too soon. It made the door easier to lift, and even slightly difficult to close - but the "top" position never changed. What am I overlooking? I can't believe both of these spring bars had the same failure at the same time, so I'm guessing I've done something wrong.Įdit to add: On both the original spring bar and the swap, I also tried increasing the tension above the normal setting for my door. It will only open to 5 or 5.5 feet any higher and the spring bar doesn't rotate to take up the support cables. I disassembled both bars and re-assembled the door with the opener. The other (non-powered) door still worked fine. Thinking that maybe I had damaged the spring somehow, today I decided to swap Torquemaster bars between my two doors. I haven't been able to find any description online for this issue. After un-tensioning, re-checking everything, and re-tensioning the spring, I had the same result. It's as if the spring bar didn't want to rotate the last turn or two. If I lifted the door any further by hand, the spring bar did not rotate I was only taking the weight off the cables. Once I re-tensioned the spring, the door opened for me manually - but stopped about 12" short of fully open. The following weekend, I de-tensioned the Torquemaster and disassembled the spring bar from the door supports, untangling the support cables and putting everything back together. I ended up having to disengage the iDrive, disconnect the support cables, and manually lower the door. This took tension off the cables, which promptly got tangled in the mechanism. Because the iDrive was still engaged (though powered off), the spring bar could not rotate, so I was lifting the door weight by hand. Unfortunately, while trying to get into the garage, I had lifted the door several inches manually. On later investigation, I found that the power cord, which was mounted to ceiling, had fallen partially, and the opening door had unplugged the opener. Depending on the model you have it comes in either a belt drive or a chain drive, and they are heavy-duty too. Wayne Dalton’s Prodrive garage door opener is one of the company’s most successful products. Wayne Dalton Prodrive Garage Door Opener. They have worked well for years.Ī couple weeks ago, I returned home and opened the door with my remote it stopped halfway up. The four most popular garage door openers made by Wayne Dalton are: 1. I have two Wayne Dalton Garage Doors, both with the Torquemaster enclosed-torsion-spring system.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |